https://dstforum.com/ Sat, 17 Oct 2026 12:53:22 +0000 MyBB https://dstforum.com/showthread.php?tid=60 Mon, 28 Sep 2026 17:07:20 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=60
## Major module improvements, automatic ECU recognition, and expanded IMMO adaptation

This release brings broader ECU coverage, faster automatic identification, improved import/export workflows, and a number of reliability fixes across the DSTVAGIMMO platform.

## How IMMO import/export works

The IMMO import/export functions make ECU replacement and IMMO adaptation easier by allowing the relevant IMMO data to be transferred between compatible vehicle modules. Depending on the supported workflow, the data can be exchanged between an ECU, TCU, or IMMO master, then imported into the replacement module that needs to be adapted.

- **Export:** reads the supported IMMO data from the source file and creates an adaptation/export file.
- **Import:** loads the adaptation file into the destination ECU or module and applies the required IMMO data.
- **Import and export modules:** support a complete two-step transfer workflow for supported ECU, TCU, and IMMO-master combinations.
- **Export-only modules:** BCM2, Passat CCM, and Audi EZS provide an export file that can be imported into the target ECU, TCU, or ELV module where the adaptation is completed.

Always use files from the same vehicle or an explicitly compatible replacement workflow, verify the detected module type, and keep an untouched backup of every original file before importing or writing adapted data.

### MEDC17

- Improved recognition for all supported WFS4 ECU types.
- Added MED17.5.1 support, including IMMO decryption and IMMO-OFF processing.
- Added EDC17U05 support.
- Added PowerClass extraction from MEDC17 flash files, with support for additional ECU variants.
- Added ECU IMMO adaptation import/export, allowing IMMO data to be transferred between compatible ECUs.
- Added dashboard IMMO-file import for adapting ECU IMMO data from a dashboard IMMO file.
- Fixed additional processing and compatibility issues across supported MEDC17 files.

### Porsche SDI

- Added centralized processing and automatic ECU detection.
- Added Porsche SDI21 ECU support.
- Added import/export support for automatic IMMO adaptation when replacing an ECU.
- Added PowerClass and Marke extraction from EDC16 flash files.
- Added PowerClass and Marke modification directly in supported EDC16 flash files.
- Improved compatibility and workflow consistency across Porsche SDI operations.

### MED9

- Added PowerClass extraction from flash files.
- Added support for additional MED9 ECU variants.

### Delphi DCM

- Merged DCM6.2 and DCM3.7 into one unified module.
- ECU type and WFS type are now detected automatically from the uploaded file.
- Added IMMO-data import/export support.
- Improved module routing and reduced the need for manual ECU selection.

### Simos 8.x

- Merged Simos 8.1, 8.2, 8.3, 8.4, 8.5, and 8.6 into one module.
- Simos 8.x files are automatically identified when uploaded.
- ECU type and WFS type are selected automatically.
- Added IMMO import/export functionality.
- Fixed a checksum-calculation issue affecting some Simos 8.5 software versions.
- Added PowerClass and Marke extraction from Simos 8.x flash files.
- Added PowerClass and Marke modification in supported Simos 8.x flash files.

### Simos 1.x.x

- Merged Simos 10, 11, 12, and 18 into one module.
- Added automatic ECU detection when files are uploaded.
- Added automatic WFS-type detection.
- Added IMMO import/export functionality.
- Fixed additional processing and compatibility issues.
- Added PowerClass and Marke extraction from Simos 1.x.x flash files.
- Added PowerClass and Marke modification in supported Simos 1.x.x flash files.

### Simos PCR 2.1

- Improved EEPROM decryption without requiring an MCU ID.
- Added IMMO import/export functionality.
- Added dashboard IMMO-file import for automatic ECU IMMO adaptation.

### TCU

- TCU type is now detected automatically when a file is uploaded; manual TCU selection is no longer required.
- Added IMMO import/export support for adaptation operations.

### Porsche BCM

- Added improved export support.
- Added IMMO-data export for ECU, slave ECU, TCU, and ELV adaptation workflows.
- Improved import/export handling for replacing and adapting supported components.

### Audi Component Protection

- Added component-protection calculation and adaptation support for Audi EZS modules.
- Added component-protection calculation and adaptation support for Audi BOSE DSP modules.

### Audi BCM2

- Added IMMO-data export for ECU, TCU, and ELV adaptation.
- Added automatic BCM2 detection for A4, A5, and Q5 files.
- Added automatic recognition for D-Flash and 95320 EEPROM files.
- Added BCM2 IMMO-data export support for Audi A4, A5, and Q5 applications.

### Audi A6 / A7 / A8, Touareg, and Lamborghini

- Added hybrid IMMO-data extraction.
- Added hybrid IMMO-data export functionality for supported Audi A6, A7, A8, Touareg, and Lamborghini files.

### Passat CCM

- Added IMMO-data export functionality for adaptation in the target ECU, TCU, or ELV module.
- Fixed additional file-processing and compatibility issues.

### Audi EZS

- Added IMMO-data export for ECU, TCU, and ELV adaptation workflows.

### Lamborghini Campi LBN15

- Added Lamborghini Campi LBN15 ECU support.
- Added IMMO-transfer decryption for supported LBN15 files.

## General improvements

- Expanded automatic detection to reduce manual module and ECU selection.
- Improved import/export workflows for ECU replacement and IMMO adaptation.
- Improved compatibility across supported software versions and file variants.
- Fixed additional bugs reported during file-processing and validation.

## Important usage note

Automatic detection is applied after the uploaded file passes the module's format and integrity checks. Always verify the displayed ECU/WFS identification before writing an adapted file to a vehicle module, and keep an original backup of every source file.]]>
## Major module improvements, automatic ECU recognition, and expanded IMMO adaptation

This release brings broader ECU coverage, faster automatic identification, improved import/export workflows, and a number of reliability fixes across the DSTVAGIMMO platform.

## How IMMO import/export works

The IMMO import/export functions make ECU replacement and IMMO adaptation easier by allowing the relevant IMMO data to be transferred between compatible vehicle modules. Depending on the supported workflow, the data can be exchanged between an ECU, TCU, or IMMO master, then imported into the replacement module that needs to be adapted.

- **Export:** reads the supported IMMO data from the source file and creates an adaptation/export file.
- **Import:** loads the adaptation file into the destination ECU or module and applies the required IMMO data.
- **Import and export modules:** support a complete two-step transfer workflow for supported ECU, TCU, and IMMO-master combinations.
- **Export-only modules:** BCM2, Passat CCM, and Audi EZS provide an export file that can be imported into the target ECU, TCU, or ELV module where the adaptation is completed.

Always use files from the same vehicle or an explicitly compatible replacement workflow, verify the detected module type, and keep an untouched backup of every original file before importing or writing adapted data.

### MEDC17

- Improved recognition for all supported WFS4 ECU types.
- Added MED17.5.1 support, including IMMO decryption and IMMO-OFF processing.
- Added EDC17U05 support.
- Added PowerClass extraction from MEDC17 flash files, with support for additional ECU variants.
- Added ECU IMMO adaptation import/export, allowing IMMO data to be transferred between compatible ECUs.
- Added dashboard IMMO-file import for adapting ECU IMMO data from a dashboard IMMO file.
- Fixed additional processing and compatibility issues across supported MEDC17 files.

### Porsche SDI

- Added centralized processing and automatic ECU detection.
- Added Porsche SDI21 ECU support.
- Added import/export support for automatic IMMO adaptation when replacing an ECU.
- Added PowerClass and Marke extraction from EDC16 flash files.
- Added PowerClass and Marke modification directly in supported EDC16 flash files.
- Improved compatibility and workflow consistency across Porsche SDI operations.

### MED9

- Added PowerClass extraction from flash files.
- Added support for additional MED9 ECU variants.

### Delphi DCM

- Merged DCM6.2 and DCM3.7 into one unified module.
- ECU type and WFS type are now detected automatically from the uploaded file.
- Added IMMO-data import/export support.
- Improved module routing and reduced the need for manual ECU selection.

### Simos 8.x

- Merged Simos 8.1, 8.2, 8.3, 8.4, 8.5, and 8.6 into one module.
- Simos 8.x files are automatically identified when uploaded.
- ECU type and WFS type are selected automatically.
- Added IMMO import/export functionality.
- Fixed a checksum-calculation issue affecting some Simos 8.5 software versions.
- Added PowerClass and Marke extraction from Simos 8.x flash files.
- Added PowerClass and Marke modification in supported Simos 8.x flash files.

### Simos 1.x.x

- Merged Simos 10, 11, 12, and 18 into one module.
- Added automatic ECU detection when files are uploaded.
- Added automatic WFS-type detection.
- Added IMMO import/export functionality.
- Fixed additional processing and compatibility issues.
- Added PowerClass and Marke extraction from Simos 1.x.x flash files.
- Added PowerClass and Marke modification in supported Simos 1.x.x flash files.

### Simos PCR 2.1

- Improved EEPROM decryption without requiring an MCU ID.
- Added IMMO import/export functionality.
- Added dashboard IMMO-file import for automatic ECU IMMO adaptation.

### TCU

- TCU type is now detected automatically when a file is uploaded; manual TCU selection is no longer required.
- Added IMMO import/export support for adaptation operations.

### Porsche BCM

- Added improved export support.
- Added IMMO-data export for ECU, slave ECU, TCU, and ELV adaptation workflows.
- Improved import/export handling for replacing and adapting supported components.

### Audi Component Protection

- Added component-protection calculation and adaptation support for Audi EZS modules.
- Added component-protection calculation and adaptation support for Audi BOSE DSP modules.

### Audi BCM2

- Added IMMO-data export for ECU, TCU, and ELV adaptation.
- Added automatic BCM2 detection for A4, A5, and Q5 files.
- Added automatic recognition for D-Flash and 95320 EEPROM files.
- Added BCM2 IMMO-data export support for Audi A4, A5, and Q5 applications.

### Audi A6 / A7 / A8, Touareg, and Lamborghini

- Added hybrid IMMO-data extraction.
- Added hybrid IMMO-data export functionality for supported Audi A6, A7, A8, Touareg, and Lamborghini files.

### Passat CCM

- Added IMMO-data export functionality for adaptation in the target ECU, TCU, or ELV module.
- Fixed additional file-processing and compatibility issues.

### Audi EZS

- Added IMMO-data export for ECU, TCU, and ELV adaptation workflows.

### Lamborghini Campi LBN15

- Added Lamborghini Campi LBN15 ECU support.
- Added IMMO-transfer decryption for supported LBN15 files.

## General improvements

- Expanded automatic detection to reduce manual module and ECU selection.
- Improved import/export workflows for ECU replacement and IMMO adaptation.
- Improved compatibility across supported software versions and file variants.
- Fixed additional bugs reported during file-processing and validation.

## Important usage note

Automatic detection is applied after the uploaded file passes the module's format and integrity checks. Always verify the displayed ECU/WFS identification before writing an adapted file to a vehicle module, and keep an original backup of every source file.]]> https://dstforum.com/showthread.php?tid=56 Sat, 12 Sep 2026 12:55:53 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=56 ]]> ]]> https://dstforum.com/showthread.php?tid=55 Sat, 12 Sep 2026 12:54:37 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=55 DSTVAGIMMO UPDATE ?
Big things keep coming on dstvagimmo.com ?
✅ A few days ago, we added BCM2 component protection calculation via Gateway EEPROM or Dflash.
✅ And that was just the beginning… Today we're adding:
? Sound System DSP component protection calculation now LIVE on dstvagimmo.com!
More tools, more coverage, more power in your hands. ?
? Check it out now: www.dstvagimmo.com
Stay tuned, more updates coming soon! ?


]]> DSTVAGIMMO UPDATE ?
Big things keep coming on dstvagimmo.com ?
✅ A few days ago, we added BCM2 component protection calculation via Gateway EEPROM or Dflash.
✅ And that was just the beginning… Today we're adding:
? Sound System DSP component protection calculation now LIVE on dstvagimmo.com!
More tools, more coverage, more power in your hands. ?
? Check it out now: www.dstvagimmo.com
Stay tuned, more updates coming soon! ?


]]> https://dstforum.com/showthread.php?tid=50 Wed, 02 Sep 2026 18:03:26 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=50 NEW ECU TOOLS UPDATE
Following requests from many of our users, we have added support for older-generation ECUs:
✅ VAG EDC16
✅ Marelli 4HV
✅ EEPROM data decryption
✅ Immobilizer OFF solution
The new modules are available now under ECU Tools on the DSTVAGIMMO platform.
Thank you for your continued feedback and support!
DSTVAGIMMO Team


]]> NEW ECU TOOLS UPDATE
Following requests from many of our users, we have added support for older-generation ECUs:
✅ VAG EDC16
✅ Marelli 4HV
✅ EEPROM data decryption
✅ Immobilizer OFF solution
The new modules are available now under ECU Tools on the DSTVAGIMMO platform.
Thank you for your continued feedback and support!
DSTVAGIMMO Team


]]> https://dstforum.com/showthread.php?tid=49 Wed, 02 Sep 2026 10:16:47 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=49 NEW RELEASE – SIMOS 18 CLONE
The new Simos 18 Clone module is now available on DSTVAGIMMO.
✅ Professional ORI-to-donor transfer
✅ FLASH + EEPROM support
✅ Automatic VIN detection
✅ Manual MCU ID option for encrypted flash files
✅ Simple, secure and user-friendly workflow
Log in to your dashboard and try it now! ?
DSTVAGIMMO – Professional Automotive Solutions


]]> NEW RELEASE – SIMOS 18 CLONE
The new Simos 18 Clone module is now available on DSTVAGIMMO.
✅ Professional ORI-to-donor transfer
✅ FLASH + EEPROM support
✅ Automatic VIN detection
✅ Manual MCU ID option for encrypted flash files
✅ Simple, secure and user-friendly workflow
Log in to your dashboard and try it now! ?
DSTVAGIMMO – Professional Automotive Solutions


]]> https://dstforum.com/showthread.php?tid=47 Tue, 01 Sep 2026 09:29:01 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=47 ONLY to DSTVagImmo.com and NOT to the forum.

Forum registration is completely FREE.
However, DSTVagImmo.com is NOT a free platform. Access to DSTVagImmo.com requires an active paid subscription.
Please DO NOT create an account on DSTVagImmo.com if you do not intend to purchase a subscription.
Creating an account alone will NOT give you access, and unpaid accounts will NOT be manually approved or activated.
Our system works automatically:
Create Account → Complete Subscription Payment → Account Automatically Activated → Access DSTVagImmo.com
Account activation happens only after a successful payment. If no payment is made, the account will remain inactive.
Therefore, please do not create accounts just to test registration or wait for manual approval. If you do not intend to subscribe to DSTVagImmo.com, there is no reason to register there.
Again, to avoid any confusion:
✅ Forum Registration = FREE
? DSTVagImmo.com Access = PAID SUBSCRIPTION REQUIRED
Thank you for your understanding.
DST Team]]> ONLY to DSTVagImmo.com and NOT to the forum.

Forum registration is completely FREE.
However, DSTVagImmo.com is NOT a free platform. Access to DSTVagImmo.com requires an active paid subscription.
Please DO NOT create an account on DSTVagImmo.com if you do not intend to purchase a subscription.
Creating an account alone will NOT give you access, and unpaid accounts will NOT be manually approved or activated.
Our system works automatically:
Create Account → Complete Subscription Payment → Account Automatically Activated → Access DSTVagImmo.com
Account activation happens only after a successful payment. If no payment is made, the account will remain inactive.
Therefore, please do not create accounts just to test registration or wait for manual approval. If you do not intend to subscribe to DSTVagImmo.com, there is no reason to register there.
Again, to avoid any confusion:
✅ Forum Registration = FREE
? DSTVagImmo.com Access = PAID SUBSCRIPTION REQUIRED
Thank you for your understanding.
DST Team]]> https://dstforum.com/showthread.php?tid=44 Tue, 25 Aug 2026 16:44:44 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=44 MQB ELV 3Q0 units with D70F3624 MCU.
The new module can:

• Check matching P-Flash and D-Flash files
  
• Detect P160A-related corruption
  
• Repair the ELV diagnostic state
  
• Recalculate and verify the required checksum
  
• Preserve VIN, FAZIT and immobilizer data
  
• Validate the repaired file before allowing download
  

The module supports cases with:

• Diagnostic error P160A
  
• No ignition
  
• Corrupted ELV internal diagnostic data
  

After uploading the files, the module displays the VIN, FAZIT and file status. If corruption is detected, the repaired D-Flash can be downloaded after successful verification.
Always save the original files before writing the repaired D-Flash.

]]> MQB ELV 3Q0 units with D70F3624 MCU.
The new module can:

• Check matching P-Flash and D-Flash files
  
• Detect P160A-related corruption
  
• Repair the ELV diagnostic state
  
• Recalculate and verify the required checksum
  
• Preserve VIN, FAZIT and immobilizer data
  
• Validate the repaired file before allowing download
  

The module supports cases with:

• Diagnostic error P160A
  
• No ignition
  
• Corrupted ELV internal diagnostic data
  

After uploading the files, the module displays the VIN, FAZIT and file status. If corruption is detected, the repaired D-Flash can be downloaded after successful verification.
Always save the original files before writing the repaired D-Flash.

]]> https://dstforum.com/showthread.php?tid=40 Sat, 22 Aug 2026 13:05:08 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=40 World-First VAG ZF 6HP AL420 TCU Adaptation

We are proud to announce that DSTVAGIMMO is the first tool in the world to support VAG ZF 6HP AL420 TCU adaptation.
This new capability provides automotive professionals with a practical alternative to expensive dealer-level access and other complicated solutions.
With DSTVAGIMMO, supported ZF 6HP AL420 transmission control units can now be adapted through a streamlined and professional workflow.
Key benefits include:

• VAG ZF 6HP AL420 TCU adaptation
  
• No expensive dealer-level access required
  
• Fast and straightforward processing
  
• Designed for professional automotive technicians
  
• Integrated into the DSTVAGIMMO platform
  

Another major step forward for independent VAG diagnostics and programming.

Always verify vehicle and TCU compatibility before performing any operation. Use the software only for lawful repair and authorized servicing.



]]> World-First VAG ZF 6HP AL420 TCU Adaptation

We are proud to announce that DSTVAGIMMO is the first tool in the world to support VAG ZF 6HP AL420 TCU adaptation.
This new capability provides automotive professionals with a practical alternative to expensive dealer-level access and other complicated solutions.
With DSTVAGIMMO, supported ZF 6HP AL420 transmission control units can now be adapted through a streamlined and professional workflow.
Key benefits include:

• VAG ZF 6HP AL420 TCU adaptation
  
• No expensive dealer-level access required
  
• Fast and straightforward processing
  
• Designed for professional automotive technicians
  
• Integrated into the DSTVAGIMMO platform
  

Another major step forward for independent VAG diagnostics and programming.

Always verify vehicle and TCU compatibility before performing any operation. Use the software only for lawful repair and authorized servicing.



]]>