<![CDATA[DST IMMO Forum - VAG ELV EZS Module]]> https://dstforum.com/ Sat, 22 Aug 2026 14:13:42 +0000 MyBB <![CDATA[VAG ELV EZS Module]]> https://dstforum.com/showthread.php?tid=34 Sat, 22 Aug 2026 11:47:48 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=34                                                                                          Audi A6/Q7 EZS Immo

Main Features:
  • Editing all immobilizer data stored in the EEPROM.
Working with the Module
To begin, load the EEPROM file by clicking the “Open EEPROM” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, ECU CS, CS2, ECU MAC, EZS MAC, Slave ECU MAC, PowerClass, KeyCount, Keys, and immobilizer status.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.
Important Note:
The module uses Immo 4 data.


                                                                                         EZS Crafter Immo:

Main Features:
  • Editing all immobilizer data stored in the EEPROM.
  • Calculate VW-TP-23 (48) Transponder data
Working with the Module

To begin, load the EEPROM file by clicking the “Open EEPROM” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, Immo ID, ECU CS, MAC, PIN, PowerClass, KeyCount, and Keys.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.
Important Note:
The module uses Immo 4 data.


                                                               ELV Audi Lamborghini VW Touareg Porsche

Main Features:
  • Editing all immobilizer data.
Working with the Module

The module supports Audi ELV units based on the Motorola 908 MCU with a 16 KB flash memory.
To begin, load the flash file by clicking the “Open ELV” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, CS, MAC, and PowerClass.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.


                                                                             MQB ELV Immo

Main Features:
  • Support for ELV modules from MQB and PQ35 platforms with Immo 4 and Immo 5.
  • Editing all immobilizer data stored in the EEPROM.
  • Changing the immobilizer status.
Working with the Module
To begin, load the flash and EEPROM files by clicking the “Open Flash” and “Open D-Flash” buttons in sequence.
During loading, the file sizes are checked to ensure they are valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
For Immo 4 modules, the following data can be modified: Fazit, VIN, Immo ID, CS, MAC, PIN, PowerClass, and Make.
For Immo 5 modules, the following data can be modified: Fazit, VIN, CS, MAC, PowerClass, and immobilizer status. The following statuses are available:
  • Not Learned
  • Learned
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save D-flash” button. The entered data is validated before it is saved CRC Calculated.
]]>                                                                                          Audi A6/Q7 EZS Immo

Main Features:
  • Editing all immobilizer data stored in the EEPROM.
Working with the Module
To begin, load the EEPROM file by clicking the “Open EEPROM” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, ECU CS, CS2, ECU MAC, EZS MAC, Slave ECU MAC, PowerClass, KeyCount, Keys, and immobilizer status.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.
Important Note:
The module uses Immo 4 data.


                                                                                         EZS Crafter Immo:

Main Features:
  • Editing all immobilizer data stored in the EEPROM.
  • Calculate VW-TP-23 (48) Transponder data
Working with the Module

To begin, load the EEPROM file by clicking the “Open EEPROM” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, Immo ID, ECU CS, MAC, PIN, PowerClass, KeyCount, and Keys.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.
Important Note:
The module uses Immo 4 data.


                                                               ELV Audi Lamborghini VW Touareg Porsche

Main Features:
  • Editing all immobilizer data.
Working with the Module

The module supports Audi ELV units based on the Motorola 908 MCU with a 16 KB flash memory.
To begin, load the flash file by clicking the “Open ELV” button.
During loading, the file size is checked to ensure it is valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
The following data can be modified: VIN, CS, MAC, and PowerClass.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.


                                                                             MQB ELV Immo

Main Features:
  • Support for ELV modules from MQB and PQ35 platforms with Immo 4 and Immo 5.
  • Editing all immobilizer data stored in the EEPROM.
  • Changing the immobilizer status.
Working with the Module
To begin, load the flash and EEPROM files by clicking the “Open Flash” and “Open D-Flash” buttons in sequence.
During loading, the file sizes are checked to ensure they are valid. 
After the data has been loaded successfully, you can begin working with the immobilizer data.
For Immo 4 modules, the following data can be modified: Fazit, VIN, Immo ID, CS, MAC, PIN, PowerClass, and Make.
For Immo 5 modules, the following data can be modified: Fazit, VIN, CS, MAC, PowerClass, and immobilizer status. The following statuses are available:
  • Not Learned
  • Learned
Immobilizer data can be edited manually or by copying values into the corresponding fields.
After making the required changes, save the data by clicking the “Save D-flash” button. The entered data is validated before it is saved CRC Calculated.
]]>