<![CDATA[DST IMMO Forum - Immo OFF Module]]> https://dstforum.com/ Tue, 06 Oct 2026 09:09:44 +0000 MyBB <![CDATA[DST IMMO OFF module]]> https://dstforum.com/showthread.php?tid=25 Thu, 20 Aug 2026 14:27:41 +0000 StefanDST]]> https://dstforum.com/showthread.php?tid=25 General Immobilizer Off Module

Main Features:
  • Disables the immobilizer function in supported ECUs and TCUs.
  • Supports multiple vehicle brands and control-unit families.
  • Processes flash or EEPROM files according to the selected module.
  • Distinguishes between PowerPC and Tricore MCU variants where required.
  • Provides dedicated processing for every supported ECU or TCU type.
  • Supports standard and KESS V3/Trasdata reads for Simos PCR2.1.
Supported Modules
VAG:
  • Bosch M3.2 — 24C02 EEPROM
  • Bosch M5.9.2 — 24C02 EEPROM
  • Bosch ME7.x
  • Bosch MED9.5.10 — unencrypted EEPROM
  • Delphi DCM 3.7
  • Delphi DCM 6.2
  • Delphi DCM 6.2 MAN
  • MD1CP004 — PowerPC and Tricore
  • MD1CP014 — Tricore
  • MD1CS001 — PowerPC
  • MD1CS002 — PowerPC
  • MD1CS004 — Tricore
  • MG1CS001 — PowerPC
  • MG1CS002 — PowerPC and Tricore
  • MG1CS008 — Tricore
  • MG1CS011 — PowerPC and Tricore
  • MG1CS163 — Tricore
  • Simos 3
  • Simos 7
  • Simos 8.1 — testing
  • Simos 8.2
  • Simos 8.3 — testing
  • Simos 8.4
  • Simos 8.5
  • Simos 9
  • Simos 10
  • Simos 11
  • Simos 16.x
  • Simos 16.12
  • Simos 18
  • Simos PPD1.x
  • Simos PCR2.1
  • TCU AL551 
  • TCU DL501 Gen1
  • TCU DL501 Gen2 
  • TCU VL381 
  • DL382 DQ380 DQ381 DQ500 DQ200 MQB gen1 and gen2 DQ250 MQB DQ400  AL552 immo off solutions flash and eeprom can be found in tcu module on this TCU types
Porsche:
  • MD1CP014 — Tricore
  • MG1CS002 — Tricore
  • MG1CS008 — Tricore
  • Porsche SDI 6
  • Porsche SDI 7
  • Porsche SDI 8
  • Porsche SDI 9
  • Porsche SDI 10
  • Simos 18
Lamborghini:
  • MG1CS008 — Tricore
BMW:
  • MG1CS003 — PowerPC
PSA:
  • Continental VD56.1 — Tricore
  • Delphi DCM 7.1A — Tricore
  • Delphi DCM 7.1B — Tricore
  • MD1CS003
  • MG1CS042
  • SID801
  • SID801A
  • SID803 — testing
  • SID803A
Renault:
  • MD1CS006
  • MD1CS016
Mercedes-Benz:
  • FBS4 EDC17CP57
  • MD1CS006
  • MD1CS016
All Brands — Older Bosch MEDC17:
  • Bosch MEDC17 family
  • For MEDC17 VAG Use MEDC17 module found in ECU Tools module  and turn immo off  Flash and eeprom It Suport all VAg medc17 ecus including MEDC17 SHE ecus as EDC17C74
Required Files
Most supported modules require a flash file. The following modules require an EEPROM file:
  • Bosch M3.2
  • Bosch M5.9.2
  • Bosch ME7.x
  • Bosch MED9.5.10
  • Simos 3
  • Simos 7
  • Simos 9
  • SID801
  • SID801A
  • SID803
  • SID803A
Simos PCR2.1 supports:
  • Standard flash file
  • KESS V3/Trasdata flash read
Working with the Module

Select the vehicle brand and the exact ECU or TCU model. Where multiple processor variants are available, select the correct PowerPC or Tricore MCU version.
Upload the required flash or EEPROM file shown by the module. After processing is complete, download the modified immobilizer-off file.
Important Notes:
  • Always select the exact control-unit and MCU variant.
  • Upload the correct file type required by the selected module.
  • Options marked “Testing” are in test mode but functional so far acording to feedbacks.
  • Always keep an unmodified backup of the original file.
  • After writing the modified file, verify ECU or TCU operation using suitable diagnostic equipment.


]]> General Immobilizer Off Module

Main Features:
  • Disables the immobilizer function in supported ECUs and TCUs.
  • Supports multiple vehicle brands and control-unit families.
  • Processes flash or EEPROM files according to the selected module.
  • Distinguishes between PowerPC and Tricore MCU variants where required.
  • Provides dedicated processing for every supported ECU or TCU type.
  • Supports standard and KESS V3/Trasdata reads for Simos PCR2.1.
Supported Modules
VAG:
  • Bosch M3.2 — 24C02 EEPROM
  • Bosch M5.9.2 — 24C02 EEPROM
  • Bosch ME7.x
  • Bosch MED9.5.10 — unencrypted EEPROM
  • Delphi DCM 3.7
  • Delphi DCM 6.2
  • Delphi DCM 6.2 MAN
  • MD1CP004 — PowerPC and Tricore
  • MD1CP014 — Tricore
  • MD1CS001 — PowerPC
  • MD1CS002 — PowerPC
  • MD1CS004 — Tricore
  • MG1CS001 — PowerPC
  • MG1CS002 — PowerPC and Tricore
  • MG1CS008 — Tricore
  • MG1CS011 — PowerPC and Tricore
  • MG1CS163 — Tricore
  • Simos 3
  • Simos 7
  • Simos 8.1 — testing
  • Simos 8.2
  • Simos 8.3 — testing
  • Simos 8.4
  • Simos 8.5
  • Simos 9
  • Simos 10
  • Simos 11
  • Simos 16.x
  • Simos 16.12
  • Simos 18
  • Simos PPD1.x
  • Simos PCR2.1
  • TCU AL551 
  • TCU DL501 Gen1
  • TCU DL501 Gen2 
  • TCU VL381 
  • DL382 DQ380 DQ381 DQ500 DQ200 MQB gen1 and gen2 DQ250 MQB DQ400  AL552 immo off solutions flash and eeprom can be found in tcu module on this TCU types
Porsche:
  • MD1CP014 — Tricore
  • MG1CS002 — Tricore
  • MG1CS008 — Tricore
  • Porsche SDI 6
  • Porsche SDI 7
  • Porsche SDI 8
  • Porsche SDI 9
  • Porsche SDI 10
  • Simos 18
Lamborghini:
  • MG1CS008 — Tricore
BMW:
  • MG1CS003 — PowerPC
PSA:
  • Continental VD56.1 — Tricore
  • Delphi DCM 7.1A — Tricore
  • Delphi DCM 7.1B — Tricore
  • MD1CS003
  • MG1CS042
  • SID801
  • SID801A
  • SID803 — testing
  • SID803A
Renault:
  • MD1CS006
  • MD1CS016
Mercedes-Benz:
  • FBS4 EDC17CP57
  • MD1CS006
  • MD1CS016
All Brands — Older Bosch MEDC17:
  • Bosch MEDC17 family
  • For MEDC17 VAG Use MEDC17 module found in ECU Tools module  and turn immo off  Flash and eeprom It Suport all VAg medc17 ecus including MEDC17 SHE ecus as EDC17C74
Required Files
Most supported modules require a flash file. The following modules require an EEPROM file:
  • Bosch M3.2
  • Bosch M5.9.2
  • Bosch ME7.x
  • Bosch MED9.5.10
  • Simos 3
  • Simos 7
  • Simos 9
  • SID801
  • SID801A
  • SID803
  • SID803A
Simos PCR2.1 supports:
  • Standard flash file
  • KESS V3/Trasdata flash read
Working with the Module

Select the vehicle brand and the exact ECU or TCU model. Where multiple processor variants are available, select the correct PowerPC or Tricore MCU version.
Upload the required flash or EEPROM file shown by the module. After processing is complete, download the modified immobilizer-off file.
Important Notes:
  • Always select the exact control-unit and MCU variant.
  • Upload the correct file type required by the selected module.
  • Options marked “Testing” are in test mode but functional so far acording to feedbacks.
  • Always keep an unmodified backup of the original file.
  • After writing the modified file, verify ECU or TCU operation using suitable diagnostic equipment.


]]>