DST Mileage Corection module - Printable Version +- DST IMMO Forum (https://dstforum.com) +-- Forum: DSTVAGIMMO.COM Modules and instructions (https://dstforum.com/forumdisplay.php?fid=33) +--- Forum: VAG Mileage Corection Module (https://dstforum.com/forumdisplay.php?fid=50) +--- Thread: DST Mileage Corection module (/showthread.php?tid=36)

DST Mileage Corection module - StefanDST - 08-22-2026 Main Features: Mileage correction for supported ECU and TCU modules. Automatic detection and validation of stored mileage data. Automatic checksum calculation after mileage correction. Support for the following ECUs: Simos PCR2.1 Simos 18 Delphi DCM 6.2 Support for the following TCUs: DQ250 MQB DQ200 AL551 VL381 Mileage correction is also available directly within the corresponding TCU modules for: DQ380 DQ381 DQ500 Working with the Module To begin, select the appropriate ECU or TCU type and upload the required flash or EEPROM file. After loading the file, the software will verify its size and structure, identify the stored mileage value, and display the detected information. Enter the required mileage in the corresponding field and click the “Correct Mileage” button. The software will update the mileage data and automatically recalculate all required checksums. After the correction process is complete, download and save the corrected file. Important Notes: Always keep an unmodified backup of the original file. Select the correct ECU or TCU type before processing the file. For DQ380, DQ381, and DQ500 units, use the mileage correction function available in the corresponding TCU module. Verify the corrected mileage using appropriate diagnostic equipment after writing the modified file.