Porsche SDI 4,6,7,8,9,10 - Printable Version +- DST IMMO Forum (https://dstforum.com) +-- Forum: DSTVAGIMMO.COM Modules and instructions (https://dstforum.com/forumdisplay.php?fid=33) +--- Forum: VAG ECU Module (https://dstforum.com/forumdisplay.php?fid=36) +--- Thread: Porsche SDI 4,6,7,8,9,10 (/showthread.php?tid=31)

Porsche SDI 4,6,7,8,9,10 - StefanDST - 08-21-2026 Main Features: Support for Simos SDI 4,6, 7, 8, 9, 10,  modules. Editing all immobilizer data stored in the EEPROM. Working with the Module To begin, enter the MCU ID and then load the EEPROM file. Enter the MCU ID in the “MCU ID” field . Load  EEPROM file by clicking “Process files.” During loading, the file sizes are checked to ensure they are valid. After the data has been loaded successfully, you can begin working with the immobilizer data. For Immo 5 modules, the following data can be modified: VIN, CS, MAC, PowerClass,  and immobilizer status. The following statuses are available: Not Learned Learned Bad Learned Immobilizer data can be edited manually or by copying values into the corresponding fields. After making the required changes, save the data by clicking the “Save Files” button. The entered data is validated before it is saved CRC calculation.