+- DST IMMO Forum (https://dstforum.com)
+-- Forum: DSTVAGIMMO.COM Modules and instructions (https://dstforum.com/forumdisplay.php?fid=33)
+--- Forum: VAG BCM and CCM Modules (https://dstforum.com/forumdisplay.php?fid=34)
+--- Thread: VAG CCM Module Passat B6 B7 CC (/showthread.php?tid=16)
VAG CCM Module Passat B6 B7 CC - StefanDST - 08-20-2026
Main Features:
- Editing all immobilizer data.
- Changing the module status.
- Cloning the module. (Use Clone Transfer Module)
To begin, load the EEPROM file by clicking the “Open EEPROM” button. During loading, the file size is checked to ensure that it is valid.
After the data has been loaded successfully, you can begin working with the immobilizer data.
The module allows you to modify the following data: VIN, Immo ID, CS, PIN, CCM MAC, ECU MAC, ELV MAC, PowerClass, Make, Immobilizer Status, and Keys.
Immobilizer data can be edited manually or by copying values into the corresponding fields.
For ECU cloning and adaptation, Copy CS pin MAC VIN to donor ecu
After making the required changes, save the data by clicking the “Save EEPROM” button. The entered data is validated before it is saved.
Important Notes:
Please note that the CCM uses Immo 4 data. Therefore, data exported from the CCM can only be loaded into modules that use immobilizer version 4.